Skip to content
(787)-476-7950 Hormigueros, PR 00660

Mon – Fri 7:00 am – 5:00 pm OPEN Saturday-Sunday CLOSED

Infrastructure · 9 services

Ubiquiti UniFi

Ubiquiti UniFi networks designed, installed and managed: Wi-Fi access points, PoE switches, gateways, guest access and UniFi Protect cameras.

UniFi network that scales wide and tall: gateway, rack switches, Wi-Fi access points, cameras and door access
Lineup of white Wi-Fi access points in different models

GlobalTech Corp. holds Ubiquiti Network Certification and builds complete UniFi networks: the access points that carry the Wi-Fi, the PoE switches that feed them, the gateway that connects the site to the internet and the console that manages all of it. GlobalTech plans the network, installs and configures it, and keeps supporting it once it is in use.

Equipment and configuration

  • Access points. Ceiling, in-wall and outdoor UniFi models on Wi-Fi 6, 6E or 7, chosen for the number of devices each area carries and the walls the signal has to cross.
  • PoE switching. UniFi switches that send data and power over one cable to access points, cameras and IP phones, with a power budget large enough for every port in use. Switches outside the UniFi line are covered on the network switches page.
  • Gateway. A UniFi gateway routes traffic, applies firewall rules between internal networks and can fail over to a second internet line. Where deeper inspection is needed, a SonicWall next-generation firewall can sit at the edge of the network.
  • Segmentation. Payment terminals, IP phones, cameras, visitors and staff each get their own VLAN, and their own Wi-Fi name where they use wireless; firewall rules decide which groups may reach each other.
  • Guest access. A hotspot portal for visitors: a sign-in page with the organization's logo, entry by voucher or shared password, and limits on session time and bandwidth for each guest.
  • UniFi Protect cameras. Protect cameras plug into the same PoE switches, stay on a VLAN of their own and appear in the same UniFi account as the Wi-Fi. Placement, recording and how long video is kept are planned through the security cameras service.

Management and multi-site networks

UniFi access points, switches and gateways report to the UniFi Network application, which lists them with connected clients and alerts on one screen. After installation, GlobalTech can keep running the network:

  • firmware updates for access points, switches and gateways;
  • new Wi-Fi networks, VLANs and firewall rules as departments, tenants or systems change;
  • guest portal settings, vouchers and bandwidth limits;
  • remote support from the console, and work at the site when equipment must be swapped or relocated.

Organizations with several locations see all of them in one UniFi account, while the devices and settings of each location stay separate. A layout that works at the first location (network names, VLANs, guest rules) can be copied to the next.

Where UniFi fits with other services

Each access point and camera needs a cable back to a switch, so most UniFi projects include structured network cabling, in Cat6 or Cat6A and tested with Fluke equipment. Where cable cannot reach, such as a detached building or a parking area across a road, a point-to-point wireless link extends the same network. APC battery backup (UPS) on the gateway and the PoE switches keeps the access points and cameras they power running through short power interruptions.

Frequently Asked Questions

Does a UniFi network carry a yearly license fee?

No per-device license is needed to run UniFi access points, switches and gateways. The UniFi Network application that manages them runs on a UniFi console, such as a Cloud Gateway or a Cloud Key, which is bought with the rest of the hardware. A project's cost is the equipment, the installation work and any ongoing management agreed with GlobalTech. Optional Ubiquiti add-on services, where a project uses them, are a separate cost.

Can an existing Wi-Fi network be moved to UniFi?

Yes. The work starts with an inventory of what is there: access points, switches, the gateway and the cable that connects them. The existing cable is tested, and runs that pass can often be kept. Home-grade routers and access points that cannot be managed from a central console are the parts normally swapped for UniFi equipment. A network that already runs UniFi can instead be extended, split into VLANs or moved to Wi-Fi 6E or Wi-Fi 7 access points.

Can UniFi work behind a SonicWall firewall?

Yes. When a SonicWall next-generation firewall protects the internet edge, the UniFi switches and access points work behind it and are still managed from a UniFi console such as a Cloud Key. Routing between VLANs and the internet rules then live on the firewall, while UniFi handles the Wi-Fi and the switching. Which layout fits depends on how much inspection and reporting the organization needs at the edge.

How is the number of access points decided?

By the devices and the building, not by floor area alone. A coverage plan marks where people work, how many phones, laptops and scanners connect at once, and which walls, shelving or metal structures block the signal. The layout is drawn on the floor plan before any hardware is bought and confirmed in the building once the access points are running. A busy meeting room may need its own access point when a storage room of the same size does not.