
Guide
How to Plan a Ubiquiti UniFi Network for a Business
Plan a UniFi network in this order: count the devices in each area and work out how many access points (APs) that load needs, not only how many cover the floor. Choose a UniFi Cloud Gateway to run the UniFi Network application (the “controller”), PoE switches with enough power for every AP, camera and phone, and a cable to each AP. Put guests, staff and devices on separate VLANs. Design for -65 dBm or better where people work, measure after installation, and manage all sites from UniFi Site Manager.
Updated November 2026
The building blocks: gateway, switches, access points, application
A UniFi network has four parts. The gateway sits between the internet line and the internal networks: it routes traffic between them and enforces the firewall rules. Switches connect wired devices, and PoE models also power APs, cameras and phones over the network cable. Access points provide the Wi-Fi. The UniFi Network application configures and monitors everything; “UniFi Controller” is the informal name many people still use for it.
Ubiquiti recommends running the application on a UniFi Cloud Gateway, which combines gateway and management in one device. A CloudKey runs it on a site that keeps a gateway of another brand; the application can also be self-hosted on your own server or cloud account, and Official UniFi Hosting runs it without any on-site host, paired with a UXG gateway.
Coverage versus capacity
Coverage asks whether every spot gets a usable signal; capacity asks whether the APs can serve every device connected at the same moment. A warehouse with a few scanners is a coverage problem. A classroom, meeting room or hotel lobby is a capacity problem: dozens of devices share the airtime of each channel.
Ubiquiti's targets are -70 dBm or better for a stable connection and -65 dBm or better as the recommended level. In dense spaces such as offices it advises medium transmit power, so neighboring APs do not interfere, and channel widths of 20 MHz on 2.4 GHz, 40 MHz on 5 GHz and 160 to 320 MHz on 6 GHz. If the signal stays weak at high power, add APs. Count devices, not people: one employee often connects a laptop, a phone and sometimes a tablet.
Wi-Fi generations and the 6 GHz band
Wi-Fi 7 is IEEE 802.11be and Wi-Fi 6 is 802.11ax. The U7 Outdoor tech specs, for example, list 802.11be and 802.11ax alongside 802.11ac and 802.11n, so older devices still connect. A new generation only helps the devices that support it: inventory laptops, phones, scanners and printers before paying for the latest model.
Each country regulates the 6 GHz band. As of November 2026, the Wi-Fi Alliance map shows 5925-7125 MHz adopted in countries such as the United States, Canada, Colombia and South Korea, and only 5925/5945-6425 MHz in others such as Germany, France and Japan. Check the current map before counting on 6 GHz capacity.
Where access points go
Put APs where the devices are, not where the cable is easiest to pull. Mount them in the open, on the ceiling or high on a wall of the area they serve. Mark wall materials, shelving and other large obstacles on the floor plan, so the survey can check the spots behind them.
Then measure. On sites with a UniFi gateway, Ubiquiti suggests its WiFiman app to check signal strength and latency; without one, or when the survey needs expert help, it suggests a professional WiFi surveyor. Its Channel AI feature assigns channels to reduce interference between neighboring APs. Wire every AP you can: in Ubiquiti's guidance, each wireless mesh hop cuts throughput by at least 50%.
Cabling and the PoE budget
Each AP needs its own cable to a PoE switch port, which carries both data and power. Size each port from the device side, using the power available at the device in the Ethernet Alliance overview of the IEEE standards (Ubiquiti's names in parentheses):
- up to 13 W: 802.3af (PoE);
- up to 25.5 W: 802.3at (PoE+);
- up to 51 W: 802.3bt Type 3 (PoE++);
- up to 71.3 W: 802.3bt Type 4 (PoE+++).
Then add up each switch. Ubiquiti lists a U7 Pro at 21 W, a U7 Outdoor at 19 W and a G5 Bullet camera at 5 W, so 10 U7 Pro, 2 U7 Outdoor and 8 cameras on one switch can draw up to 288 W. The switch's PoE availability, its total power for all ports, must be greater than that sum; Ubiquiti's table runs from 42-195 W for Standard and 45-52 W for Lite switches up to 950-1,050 W for Enterprise Campus. UniFi PoE adapters are passive and always output voltage, so never connect one to a computer or printer. Power lost in the cable, bundling and testing are in the structured cabling guide.
Separating guest, staff and device traffic
On a flat network, a visitor's phone can reach the file server and the cameras. Split it into VLANs (staff, guests, voice, cameras, building devices); traffic between them is routed, usually by the gateway, where firewall rules decide what is allowed; on a UniFi gateway, internal VLANs can reach each other until Network Isolation or a firewall rule blocks that traffic. UniFi can assign the VLAN by:
- Wi-Fi network name (SSID), one VLAN for each;
- PPSK, where the password picks the VLAN on a shared SSID (not available on 6 GHz);
- switch port, for fixed printers and servers;
- RADIUS, by user credentials (802.1X) or by a device's MAC address, such as a camera's.
For guests, Ubiquiti recommends Network Isolation on the guest VLAN and Client Device Isolation, with an optional Hotspot Portal (captive portal) and optional speed limits. The cybersecurity baseline guide shows where segmentation sits among other controls.
Managing several sites
UniFi Site Manager, at unifi.ui.com and in the UniFi mobile app, shows every site an administrator owns or was granted in one interface. It adds SD-WAN to link UniFi Gateways by VPN, internet metrics (latency, packet loss, uptime) for every site, an Update Manager to run updates across sites, and admin roles. UniFi Fabrics group sites under shared identity, role-based access and policy templates.
Fix the conventions before the first installation: one naming scheme for sites, devices and SSIDs; the same VLAN number for the same purpose everywhere; a non-overlapping address range per site, so branches can be linked later; and a written list of administrators.
Field notes: outdoor units, heat, humidity, salt air and power cuts
Heat, humidity, salt air and unreliable power change several choices:
- Outdoor-rated APs outside. The U7 Outdoor specs list IPX6 weatherproofing, -30 to 60 °C, 5 to 95% non-condensing humidity and wind loading of 74.6 N at 200 km/h. Check the same lines for any model meant for eaves, poles or unconditioned warehouses; outdoors, also ground the mount and fit a grounded Ethernet surge protector where the cable enters the building.
- Condensation. Ratings are non-condensing: seal cable entries and form drip loops.
- Salt air. Salt corrodes exposed connectors and fixings; use outdoor-rated cable and stainless hardware, and inspect them on a schedule.
- Power. APs and cameras run on the PoE switch, so a UPS on the gateway, the PoE switches and the video recorder, if there is one, keeps Wi-Fi, cameras and recording running while its batteries last.
- A second internet path. UniFi gateways accept up to eight WAN links, limited by their physical ports, with at least one port kept for the LAN; in failover mode, traffic moves to the backup and returns when the main line recovers.
Common mistakes and a planning checklist
Common mistakes
- Counting square meters and ignoring how many devices connect at once.
- Raising power or widening 2.4 GHz and 5 GHz channels in a dense office.
- Meshing where a cable could be run.
- Adding PoE devices without adding up their draw.
- One flat network for guests, staff and cameras.
Planning checklist
- Floor plans with wall materials marked.
- Devices per area, with their Wi-Fi generation and 6 GHz support.
- AP positions, cable paths and network rooms.
- PoE budget per switch, with room to grow.
- VLAN list and guest policy.
- Internet lines, backup path and UPS runtime.
- Outdoor spots and their heat, water and wind exposure.
- A survey after installation and a record of APs, channels and switch ports.
Frequently Asked Questions
How many UniFi access points does a building need?
No fixed number per square meter works, because walls, ceiling height and the number of devices change the answer. Start from the devices in each area and a target of -65 dBm or better, draw the positions on the floor plan, then measure after installation and add APs where the signal or the airtime falls short.
Is PoE+ enough for UniFi access points?
For many models, yes. PoE+ (802.3at) delivers 25.5 W to the device, while Ubiquiti lists the U7 Pro at 21 W and the U7 Outdoor at 19 W. Larger models can need more: the E7 is listed at 43 W, which calls for an 802.3bt port. Check each model's draw and the switch's total PoE availability.
Can wireless mesh replace cabling to the access points?
Only where a cable really cannot be run, such as a temporary area or a detached corner of a site. Meshing adds interference and loses at least half the throughput at every hop. When it is unavoidable, Ubiquiti advises keeping the meshed AP close enough to hear its parent at -60 dBm or better.
What happens to a UniFi network when the internet connection fails?
The local network keeps working, and with a Cloud Gateway or CloudKey on site the UniFi application is still reachable on the local network. Remote access through Site Manager comes back with the line. A gateway with a second WAN link set to failover switches to it automatically, so VoIP phones and card terminals can keep working while the main line is down.
Sources
- Ubiquiti Help Center: Introduction to UniFi
- Ubiquiti Help Center: Optimizing WiFi Connectivity and Reducing Latency
- Ubiquiti Help Center: PoE Availability and Modes
- Ethernet Alliance: Overview of 802.3bt, Power over Ethernet standard (April 2018)
- Ubiquiti Help Center: Creating Virtual Networks (VLANs)
- Ubiquiti Help Center: Best Practices: Guest WiFi
- Ubiquiti Help Center: UniFi Remote Management via Site Manager
- Ubiquiti Help Center: WAN Failover, Load Balancing and Port Remapping on UniFi Gateways
- Ubiquiti Tech Specs: U7 Outdoor
- Wi-Fi Alliance: Regulations Enabling 6 GHz Wi-Fi
About this guide
GlobalTech Corp. prepared this guide. Located in Hormigueros, Puerto Rico, the company holds Ubiquiti Network Certification, designs, installs and manages UniFi enterprise Wi-Fi, and brings over 25 years of experience. Its service area is all of Puerto Rico, including Vieques and Culebra. What its UniFi work includes is set out on the Ubiquiti UniFi service page; how projects run on the island is covered under UniFi network installation in Puerto Rico. Figures and settings were checked against the sources above in November 2026.
More guides: Technology Guides.